DISC & environment
relation

DEMAGNETIZER
WITH
MANY USES FOR
AUDIO (RD-3)

Ground
conditioner
(RGC-24)

Negative
ion generetar
(RIO-5 II)

Ultra
Low-frequency Pulse Generator
(RR-77)

Acoustic
Conditioner
(RWL-3)

Room
Acoustic
Conditioner (WS-1)

Speaker
stand

Under
board (YST-64)

Pure
smoky Quartz Insulator (RIQ-5010) &
Pure Quartz
Insulator
(RIQ-5010W)

Short
Plug (SIP-8F,BSIP-2F,IP-2F)

Noise
filter (FCS-8)

Purity
silk absorber
(PSA-100)

Quartz
Resonator (QR-8)

EMF
Canceller (REM-8)

Air
Floating Board (RAF-48)

Power supply & cable
relation

Power
Distributor
RTP-2ultimate
RTP-4ultimate
RTP-6ultimate

Receptacle
Base Plate (CB-1DB)

Carbon
fiber Receptacle
Plate(CFRP-1F)

POWER
REFERENCE

Single
Core Cable series PCOCC-A

Digital
Cable
(DSIX-1.0PA,DSIX-1.0BPAII)

Outlet
stabilizer(CS-2F)

Banana
Plug (RBN-1) &
Y rag (RYG-1)

Bi-wire
adapter (BWA-4)

Cable
Insulator (RCI-3)

Distributors

Distributors

Size:W80 X H64 X
D30mm
Accepts cables size up to 40mm W X 30mm
H

High evaluation
reviews!

RCI-3 review by U.S magazine "Affordable
Audio"

2009 Audio Excellence
Award

Visual Grand Prix
2009

Principal
& Structure

The purpose of
a cable insulator is to prevent cables from being influenced by
vibrations from the speaker. Most conventional cable insulators (or
stabilizers) are made from a single material. So even if the cable
is lifted from the floor, they will generate their own resonance
which will inevitably induce coloration.

We at Acoustic
Revive have tested many materials, and as a result of these tests we
decided to adopt a combination of top quality maple and ebony, which
makes the sound natural and free from coloration. The cable contact
surface is covered with special vibration control material for
superb resonance control.

In addition,
inside the insulator is a blend of natural ores which absorb
electromagnetic waves and radiated noise from the cable. Because of
its combination of resonance control and noise absorption abilities,
the RCI-3 will dramatically improve sound in a manner never before
achieved. Noise is dramatically reduced and sound stage and imaging
are more focused and three dimensional. The tone will become
smoother as well.

Using the RCI-3 on one power cable
has a huge effect!
Using
more and more RCI-3 to lift cables up from the floor or the rack
will improve transparency and make the sound very three dimensional,
but using even one RCI-3 on a power cable will have a great effect.
Power cables are affected not only by speaker vibrations, but also
by the electric power flowing through the cable itself, which leads
to loss in voltage and distortion.

Power cables
release strong radiation noise which badly affects the surrounding
cables and equipment. Using the RCI-3 on power cables allows
electricity to flow more smoothly, greatly reducing resonance and
radiation noise.

Effective even if all cables are
lifted!
Many
audiophiles already use short cables that don’t touch the floor or
employ some method to keep the cables floated off of the floor or
rack. Even in these cases, using the RCI-3 is very
effective.

This is because
the resonance control structure and electromagnetic wave absorbing
characteristics of the RCI-3 are very powerful. You can expect a
dramatic sound quality improvement by using the RCI-3 Cable
Insulator.